China poultry auger feeder

 SY series screw conveyor are of simple, relatively low cost construction compared to other conveyor systems. Powder Handling Productive Auger Conveyor consist of a helical flight fastened around a pipe or solid shaft, mounted within a tubular or U-shaped trough. As the screw rotates,material heaps up in front of the advancing flight and is pushed through the trough.Particles in the heap next to the flight surface are carried part way up the flight surface,and then flow down on the forward-moving side of the heap.Products can be conveyed and elevated at the same time by mounting a screw conveyor at an incline. This is often desirable because it covers two operations with one piece of equipment therefore saving space and reducing downtime,maintenance cost, etc. A standard Electric Screw Conveyor will often operate normally at angles up to 15º with only a small loss in capacity. Beyond that, adjustments and/or modifications are typically necessary.

 Features:
1. It separates and transports sands spirally. It is light because of no underwater bearing which makes its maintenance more convenient.
2. The adoption of new decelerator makes the structure very compact, the operation smooth and the installation more convenient.
3. The using of the flexible bars in tube, which are wear-resisting, makes the separator work with lower noise, and replace of these bars easily.
4. The whole set enjoys simple installation and easy operation.

Technical parameter

In designing screw feeder with hopper for a specific purpose,many questions must be nswered in order to achieve optimal performance.Information needed would be:
Material capacity feeding from the inlet): _____t/h

Upstream equipment:_____
Bulk Density: _____t/m3          equipment is used to feed the material): _____
Material size:____mm         Other factors that can helpful to know are the abrasiveness, corrosiveness,or viscosity of the aterial to be conveyed.

Installation form is horizontal or inclined : ________;
If it is inclined,what is the inclined degree_____° ,
Water content:____% and whether a supporting frame is needed:_______

Whether add hopper:                     The volume of the hopper is             m³
Material is corrosive or not: ____ (Ps. Yes or No)

Working power supply: _____V ______HZ___Phase